Industry Directory | Consultant / Service Provider / Manufacturer
TRC Circuits provides high quality printed circuit boards to a wide range of industries. We have 23 years of experience manufacturing printed circuit boards.
Industry Directory | Manufacturer
Since 1971, Eagle Electronics Inc. has provided our Customers with the highest quality Printed Circuit Boards at fair and competitive prices.
New Equipment | Education/Training
This is a "real life" how to solder kit including both throughhole and SMT components. The board has ground planes that you would find in a real PCB assembly. Upon completion the sudents will have a working board. If you are trying to instruct new
New Equipment | Surface Finish
Technic supplies precious metal and tin and tin alloyed products that are used to preserve as well as enhance soldering and bonding through all levels of interconnection. Technic is well established as a leader in Final Finish Solutions for printed
Electronics Forum | Sun Sep 21 10:55:52 EDT 2008 | vladig
As long as the surface is solderable, you should be fine. Silver tarnish a well0-known thing. Make sure, though, there is no sulfur (S) "around". Regards, Vlad
Electronics Forum | Mon Sep 22 15:32:20 EDT 2008 | davef
We see this fairly often. It doesn't affect solderability. Our analysis makes us think this coloration is copper. The reason copper appears on the surface may be that heat cycles increase the thinness and porosity of the immersion silver [IAg] coatin
Industry News | 2023-06-12 21:14:11.0
The 2023 Beijing Intelligent Manufacturing and SMT Technology Exchange Conference, hosted by the Intelligent Manufacturing Committee of the Beijing Electronics Society, was successfully held in Beijing on May 25th. HELLER was honored to be invited and actively participated by sharing their cutting-edge technology and expertise.
Industry News | 2003-04-10 10:27:46.0
IPC and JEDEC Send Out Call for Papers
Parts & Supplies | Circuit Board Assembly Products
PULANG TECHNOLOGY CO,.LTDOffers electronic manufacturing services including PCB designing, electronic contract manufacturing including electronic product design, electronic product development, electronic product repair, PCB manufacturing, electronic
Technical Library | 2019-06-07 14:49:54.0
ACI Technologies was contacted in regards to poor solder joint reliability. The customer submitted an assembly that was exhibiting intermittent opens at multiple locations on a ball grid array (BGA) component. The assembly’s functionality did not survive international shipping, essentially shock and vibration failures, immediately making the quality of the solder joints suspect. The customer was asked about the contract manufacturer and the reflow oven profile as well as the solder paste and surface finish used. The ACI engineering staff evaluated the contract manufacturer’s technique and determined that they were competent in the methods they used for placing thermocouples in the proper locations and developing the reflow oven profile. The surface finish was unusual, but not unheard of, in that it was hard gold over hard nickel, rather than electroless nickel immersion gold (ENIG). The customer was able to supply boundary scan testing data which showed a diagonal row of troublesome BGA pins.
Technical Library | 2013-01-24 19:16:35.0
The electronics industry has mainly adopted the higher melting point Sn3Ag0.5Cu solder alloys for lead-free reflow soldering applications. For applications where temperature sensitive components and boards are used this has created a need to develop low melting point lead-free alloy solder pastes. Tin-bismuth and tin-bismuth-silver containing alloys were used to address the temperature issue with development done on Sn58Bi, Sn57.6Bi0.4Ag, Sn57Bi1Ag lead-free solder alloy pastes. Investigations included paste printing studies, reflow and wetting analysis on different substrates and board surface finishes and head-in-pillow paste performance in addition to paste-in-hole reflow tests. Voiding was also investigated on tin-bismuth and tin-bismuth-silver versus Sn3Ag0.5Cu soldered QFN/MLF/BTC components. Mechanical bond strength testing was also done comparing Sn58Bi, Sn37Pb and Sn3Ag0.5Cu soldered components. The results of the work are reported.
This is what the fully assembled How to Solder Kit looks like. Depress the button and one of the LEDs will remain lit at the end (it eventually times out). You can add some kind of template so each LED position has some meaning. The PCB has a real gr
Events Calendar | Tue Apr 06 00:00:00 EDT 2021 - Tue Apr 06 00:00:00 EDT 2021 | ,
Capital Chapter Webinar: Next Gen Lead Free Solders for High Reliability & SMT Yield improvement
Events Calendar | Mon Apr 23 00:00:00 EDT 2018 - Thu Apr 26 00:00:00 EDT 2018 | Shanghai, China
SMTA China East Conference 2018
Career Center | Phoenix, Arizona | Engineering,Management,Production,Quality Control,Research and Development,Sales/Marketing,Technical Support
• Highly motivated, solution oriented professional with proven record synergizing scientific, engineering, and business administration backgrounds to drive and sustain customer satisfaction and long term improvements. • Articulate communicator that a
.gif)
